Smoke density detection

Where can I test smoke density? Where can I get a smoke density test report that is highly recognized? BAIJIAN material testing agency can provide smoke density testing services. It is a third-party material laboratory with complete testing instruments and a strong scientific research team. 7-15 jobs Test reports are issued on a daily basis. Test reports support scanning the QR code to check the authenticity. Multiple laboratory branches across the country support nationwide door-to-door sampling/sample delivery testing services.

Detection cycle: 7-15 working days

Testing fee: Initial inspection of samples. After the initial inspection, a quotation will be made based on the customer's testing needs and the complexity of the experiment.

Testing items: ISO9239 smoke density testing, ASTM e84 smoke density testing, NBS smoke density testing, smoke density level testing, GB /T 32129 Smoke density detection, etc.

Smoke density detection range

Plastics, building materials, PVC, cables, automotive interiors, polyethylene, flame-retardant cables, polyurethane, rubber and plastic insulation materials, extruded boards, foam Plastics, textiles, wires and cables, cable auxiliary materials, foam plastics, PVC, etc.

What are the uses of BAIJIAN test reports? What problems can it help you solve?

1. Sales report. (Sales need to provide third-party testing reports to make their products more unique, let the product data speak for themselves, and make customers more confident in the quality of their products.)

2. Industrial diagnostic report. (When encountering some thorny issues about ingredients, use third-party testing data to find the cause of the problem and solve the problem in a timely manner.)

3. Improve product quality. (Discover problems with your own products through comparison of third-party testing data, improve product problems, improve quality, and reduce production costs)

4. Use of scientific research paper data.

5. Products are used for import and export.

Smoke density detection standard

GB/T 8323.1-2008 Plastic smoke generation Part 1: Smoke density Guide to test methods

GB/T 8323.2-2008 Plastic smoke generation Part 2: Determination of smoke density test by single-chamber method

GB/T 8627-2007 Burning or decomposition of building materials Smoke density test

GB/T 17651.1-1998 Determination of smoke density of electric cables or optical cables burning under specific conditions Part 1: Test device

GB/T31786-2015 Non-destructive testing of smoke density deviation rate of tobacco and tobacco products in boxes

HB 6577-2014 Smoke density test of non-metallic materials inside civil aircraft cabins

JB/T 4278.16- 2011 Verification of rubber and plastic wire and cable testing instruments and equipment Part 16: Smoke density test device

MH/T 6040-2017 Smoke density test for aviation materials

YC/T 236-2008 Tobacco and Non-destructive testing of smoke density deviation rate in tobacco product boxes

ASTM D2156-2009 Test of smoke density of exhaust gas from burning distillate fuel

DIN EN 61034-1-2006 Cable in Determination of smoke density of burning cables under specified conditions

DIN EN 61034-2-2006 Determination of smoke density of cables burning under specified conditions Part 2: Test procedures and requirements

BAIJIAN Material Testing What are the advantages of laboratories?

1. Collectively owned testing institutions with complete qualifications and scientific, fair and accurate test reports.

2. Multiple laboratory branches are located across the country, supporting door-to-door sampling/sending samples for testing.

3. The testing cycle is short, the testing cost is low, and the experimental plan is more complete.

4. For initial inspection of samples, no testing fees will be charged during the initial inspection.

5. The test report supports scanning the QR code to check the authenticity.

BAIJIAN testing process

1. Send samples. (Communicate with engineers, submit your own testing requirements and send samples to our research institute)

2. Initial inspection samples. (After receiving the sample, conduct a preliminary inspection of the sample and formulate a detailed experimental plan)

3. Quotation. (After the initial inspection, a quotation will be made based on the customer's testing needs and the complexity of the experiment)

4. Both parties confirm, sign a confidentiality agreement, and start the experiment.

5. It takes 7-15 working days to complete the experiment.

6. Mail the test report and provide post-service.

The above is the relevant introduction to smoke density detection. If you have other detection needs, you can consult the laboratory engineer to help you solve it.