Introduction to dolomite test report items and standards

Dolomite testing needs to be carried out according to the specified items and methods in the standards, GB national standards, industry standards, external standards, enterprise standards, and local standards. What are the dolomite testing items and standards? BAIJIAN third-party testing agency provides one-stop service for dolomite testing. Engineers provide one-to-one service, confirm needs, recommend solutions, send samples for inspection, issue reports, and after-sales service, 3-15 work The report will be issued on the same day, welcome to consult the Dolomite Testing Service

Test Report: Dolomite Test

Testing cycle: Normally 3-15 working days, except for special samples, expedited arrangements can be made within the scope of feasibility.

Report format: paper, electronic, Chinese and English.

Dolomite testing items:

Testing items:

Calcium oxide, phosphorus, carbon dioxide, manganese oxide, magnesium oxide, aluminum Al, manganese Mn, magnesium Mg , Silica, sulfur, loss on ignition, free silica, sulfur S, acid insoluble matter, loss on ignition LOS, calcium oxide and magnesium oxide, iron oxide, aluminum oxide, phosphorus P, ferric oxide, potassium oxide , manganese, magnesium oxide, calcium oxide, potassium oxide, sodium oxide, aluminum oxide, titanium dioxide, loss on ignition, calcium, magnesium, loss on ignition, iron Fe, silicon Si, sodium oxide, silicon, potassium oxide, sodium oxide, calcium , magnesium, loss on ignition, titanium, carbon, sulfur, carbon, aluminum, potassium, calcium oxide, magnesium oxide, silicon dioxide, iron oxide, aluminum oxide, iron

Dolomite testing standards:

Testing Standards:

1. GB/T3286.1-2012 Limestone Dolomite Chemical Analysis Methods Part 1: Determination of Magnesium Oxide and Calcium Oxide Amounts Complexometric Titration and Flame Atomic absorption spectrometry

2, SN/T 3321.3-2015 Limestone and dolomite analysis methods Part 3: Determination of primary and secondary component contents Wavelength dispersive X-ray fluorescence spectrometry

3 , GB/T 3286.3-1998 Methods for chemical analysis of limestone - Determination of alumina

4. GB/T 3286.8-2014 Methods for chemical analysis of limestone and dolomite - Part 8: Gravimetric method for determination of loss on ignition

5. GB/T 3286.1-1998 Chemical analysis method for limestone and dolomite. Determination of calcium oxide content and magnesium oxide content

6. GB/T 3286.6-1998 Limestone and dolomite Determination of phosphorus content by chemical analysis method

7. GB/T 3286.4-1998 Determination of iron oxide content by chemical analysis method of limestone and dolomite

8. GB/T 5762-2012 Building materials Methods for chemical analysis of limestone, quicklime and hydrated lime

9. GB/T3286.5-1998 Methods for chemical analysis of limestone and dolomite

10. GB/T3286.2-1998 Limestone, Dolomite chemical analysis method

11. GB/T 3286.7-1998 Determination of sulfur content by chemical analysis method of limestone and dolomite

12. GB/T 15057.3-1994 Determination of hydrochloric acid insoluble matter content in limestone for chemical industry by gravimetric method

13. GB/T 14506.5-1993 Limestone chemical analysis method - Determination of ferric oxide

14. GB/T 14840-2010 Limestone chemical analysis method - Determination of free silica content

15. GB/T 3286.3-1998 Chemical analysis method for limestone and dolomite - Determination of aluminum oxide content

16. GB/T 3286.1-19981 Chemical analysis method for limestone - Determination of calcium oxide

17. GB/T3286.9-1998 Methods for chemical analysis of limestone and dolomite

18. GB/T 5762.14-2000 Methods for chemical analysis of limestone used in building materials Determination of titanium dioxide

19. GB/T 3286.2-2012 Chemical analysis method of limestone and dolomite. Determination of silica content - perchloric acid dehydration gravimetric method

20. GB/T3286.6-1998 Chemical analysis of limestone and dolomite. Method Part 8: Gravimetric method for determination of loss on ignition

BAIJIAN testing process

1. Confirm samples and requirements

2. Formulate plan

3. Quotation

4. Both parties confirm, sign a confidentiality agreement, and start the experiment

5. It takes 3-15 working days (except for special samples) to complete the experiment

6. Issue test report and provide follow-up service.

What is the use of the test report?

1. Enter e-commerce platforms such as Tmall and JD.com.

2. Enter a large supermarket or store.

3. Bidding.

4. Project acceptance.

5. Publicity reports.

6. Supplier requirements.

For detailed information about the inspection, you can contact Baiqian customer service first, and the corresponding engineer will be arranged to connect with you later. Baikan third-party testing agency welcomes your consultation and looks forward to cooperating with you.