List of thermal insulation and energy saving testing items and standards

How to handle thermal insulation and energy-saving test reports? The results of the thermal insulation and energy-saving test sample test reports will be compared with the requirements in the standard, and the product quality parameters will be reflected in the report. BAIJIAN third-party testing agency can provide one-stop services for thermal insulation and energy-saving testing. Engineers provide one-to-one service to confirm needs, recommend solutions, send samples for inspection, issue reports, and after-sales services. Reports will be issued in 3-15 working days. Welcome to consult for thermal insulation , The energy-saving testing cycle is 3-15 working days, and can be expedited (except for special projects). Welcome to consult.

Testing report: Insulation, energy saving testing

BAIJIAN third-party testing agency supports sample delivery and door-to-door testing. It mainly provides sample testing services for companies, enterprises, institutions, individual merchants, and university scientific research, and reports CMA /CNAS/CAL qualification, real and valid.

Testing fee: determined based on the actual testing items of the sample. Please call us for details.

Thermal insulation and energy saving testing items:

Testing items:

Exterior wall energy-saving structure drill core, pressure shear bonding strength, bonding strength, breaking strength test Longitudinal and weft directions, on-site physical inspection of exterior window air tightness, constructability, dry apparent density, flexural strength, alkali-resistant breaking strength and retention rate, warp and weft directions, tensile bonding strength, compressive strength, elongation at break Longitudinal and latitudinal directions, mass moisture content, fracture strain in longitudinal and latitudinal directions, state in container, bulk density, combustion performance, softening coefficient, moisture content, compression ratio, bulk density, compressive strength, external insulation system Bonding performance, setting time, thermal conductivity heat flow meter, anchor pullout strength, wet apparent density, mass per unit area, volume water absorption, anchor disc strength standard value, water retention rate, apparent density, shear viscosity Knot strength, grain size, tensile strength perpendicular to the board surface, operable time, elongation at break in warp and weft directions, dry density, linear shrinkage, standard value of tensile bearing capacity of a single anchor bolt, bonding strength of tiles < /p>

Thermal insulation and energy saving testing standards:

Testing standards:

1. JG 149-2003 Expanded polystyrene board thin plaster exterior wall insulation system/

2. GB/T 9914.3-2013 Test methods for reinforced products Part 3 Determination of mass per unit area/

3. GB 50404-2007 Technical specifications for rigid foam polyurethane thermal insulation and waterproofing engineering/

4. GB/T 26000-2010 Expanded vitrified microsphere thermal insulation mortar/

5. GB/T 7106-2008 Airtightness, watertightness and wind pressure resistance of exterior doors and windows of buildings Classification and testing methods/

6. JC/T 561.1-2006 Appendix A Reinforced glass fiber mesh Part 1: Glass fiber mesh for resin grinding wheels/

7. JC /T 517-2004 Plaster plaster/

8. GB/T 7689.5-2013 Reinforcement material woven fabric testTest methods Part 5 Determination of tensile breaking strength and breaking elongation of glass fiber/

9. GB/T 17669.3-1999 Determination of mechanical properties of building gypsum/

10. JG /T 298-2010 Putty for building interiors/

11. GB/T 20102-2006 Test method for alkali resistance of glass fiber mesh sodium hydroxide solution immersion method/

12. DG/TJ08-2088-2011 Technical regulations for the application of inorganic thermal insulation mortar systems/

13. GB/T 10295-2008 Determination of steady-state thermal resistance and related characteristics of thermal insulation materials by heat flow meter method/

15. JG/T 229-2007 Flexible water-resistant putty for exterior wall insulation/

16. JG/T 157 -2009 Putty for building exterior walls/

17, JC/T 647-2014 Appendix B Foam glass insulation products/

18, JG/T 24-2000 Synthetic resin emulsion sand wall Architectural coatings/

19. GB/T 5486-2008 Test methods for inorganic rigid insulation products/

20. GB/T 8624-2006 Combustion performance classification of building materials and products/

Baiqian testing service process

1. Sample provision: The customer provides samples to be tested and develops a testing plan;

2. Sample reception: The laboratory receives it Check and enter sample information after taking the sample;

3. Sample processing: Perform necessary pre-processing on the sample to ensure the accuracy of the test results;

4. Detection analysis: Use appropriate Test the samples using physical, chemical or biological methods to ensure test coverage and accuracy;

5. Result report: According to the test plan, BAIJIAN will inform customers of the test results in a concise and accurate manner. And provide detailed test reports.

The role of the test report:

1. Project bidding: CMA/CNAS qualification report;

2. Online e-commerce platform settlement: quality inspection reports from major Recognized by e-commerce platforms;

3. Used as sales reports: issue test reports with legal effect to make consumers more assured;

4. Papers and scientific research: provide professional personality chemical testing needs;

5. Judicial services: provide scientific, fair and accurate testing data;

6. Industrial problem diagnosis: verify the troubleshooting and correction of problems in industrial production links;

The content of the above article is a partial list. For more testing needs and details, please consult the agency’s online customer service for free. For testing, go to BAIJIAN for real sample testing and real reports.tell.