Oxide film test

Where to do oxide film testing? BAIJIAN Materials Testing Agency provides oxide film testing services. It is a national high-tech enterprise, a third-party materials laboratory, and a CMA qualification certification agency. It is a collectively owned scientific research institution with complete laboratory instruments and a strong scientific research team. , adhering to the concept of scientific research and dedication, engaged in performance testing, non-standard testing, unknown substance analysis and identification, industrial problem diagnosis and analysis, composition testing, failure analysis, corrosion analysis, etc., test reports will be issued in 7-15 working days, and support QR code system To check the authenticity, multiple laboratory branches across the country support door-to-door sampling/sample delivery testing services nationwide.

Test period: 7-15 working days

Test fee: Initial inspection of samples. After the initial inspection, a quotation will be made based on the customer's testing needs and the complexity of the experiment.

Oxide film test scope

Nuclear fuel assembly oxide film, aluminum and aluminum alloy oxide film, zirconium alloy oxide film, anodic oxide film, metal oxide film, aluminum material oxide film, etc.

Oxide film test items

Wear resistance test, sweat resistance test, thickness test, high and low temperature test, corrosion resistance test, hardness test, salt spray resistance test, sealing degree test, Resistance withstand voltage test, boiling test, high temperature resistance test, peeling test, ultraviolet test, corrosion resistance test, conductivity test, adhesion test, porosity test, adhesion test, internal stress test, bonding force test, dielectric Constant test, residual stress test, immersion test, exposure test, microstructure test, etc.

The above are only some of the test projects. If you have other needs, you can directly contact the online laboratory engineers to provide you with one-on-one answers.

What does the BAIJIAN third-party test report do? What problems can it help you solve?

1. Sales report. (Sales need to provide third-party testing reports to make their products more unique, let the product data speak for themselves, and make customers more confident in the quality of their products.)

2. Research and development reports. (In the process of developing new products, we encountered some thorny issues about ingredients. We used third-party testing data to find the cause of the problem, solve the problem in a timely manner, shorten the R&D cycle, and reduce R&D costs)

3. Improve products quality. (Discover problems with your own products through comparison of third-party testing data, improve product problems, improve quality, and reduce production costs)

4. Use of scientific research paper data.

Oxide film testing standards

GB/T 6808-1986 Artificial light accelerated test of light fastness of anodized and colored anodized films of aluminum and aluminum alloys

GB/T 8013.1-2018 Anodized films of aluminum and aluminum alloys and organic polymer films Part 1: Anodic oxidation films

GB/T 8013.2-2018 Anodic oxide films and organic polymer films for aluminum and aluminum alloys Part 2: anodized composite films

GB/T 8013.3-2018 Anodic oxidation films and organic polymer films for aluminum and aluminum alloys Part 3: Organic polymer coatings

GB/T 8014.3-2005 Anodized oxide films for aluminum and aluminum alloys Thickness measurement method Part 3: Split-beam microscopy method

GB/T 8752-2006 Continuity test method for thin anodized anodized films of aluminum and aluminum alloys Copper sulfate method

GB /T 8753.1-2017 Evaluation method for sealing quality of aluminum and aluminum alloy anodized oxide films - Part 1: Acid etching weight loss method

GB/T 8753.3-2005 Anodic oxide film seals for aluminum and pin alloys Method for assessment of hole quality Part 3: Admittance method

GB/T 8753.4-2005 Method for assessment of hole sealing quality of anodic oxidation films of aluminum and aluminum alloys Part 4: Stained spots after acid treatment Method

GB/T 8754-2006 Determination of insulation properties of anodized films by anodized aluminum and aluminum alloys Breakdown potential method

GB/T 12967.1-2008 Anodized aluminum and aluminum alloys Film testing method Part 1: Determining the average wear resistance of anodized films using a spray abrasion tester

GB/T 12967.2-2008 Anodic oxidation film testing methods for aluminum and aluminum alloys Part 2: Using wheel type Wear tester determines the wear resistance and wear resistance coefficient of anodized films

GB/T 12967.3-2008 Testing methods for anodized films of aluminum and aluminum alloys Part 3: Copper Accelerated Acetic Salt Spray Test (CASS) Test)

GB/T 12967.4-2014 Testing methods for anodized films of aluminum and aluminum alloys Part 4: Determination of UV resistance of colored anodized films

GB/T 12967.5- 2013 Testing Methods for Anodic Oxidation Films on Aluminum and Aluminum Alloys Part 5: Use the Deformation Method to Evaluate the Fracture Resistance of Anodized Films

GB/T 12967.6-2008 Testing Methods for Anodic Oxidation Films on Aluminum and Aluminum Alloys Part 6 : Visual observation method to inspect the color difference and appearance quality of colored anodized films

GB/T 12967.7-2010 Detection methods for anodized films of aluminum and aluminum alloys Part 7: Determination of anodized films using a falling sand tester Wear resistance

GB/T 15519-2002 chemical conversion coating steel blackSpecifications and test methods for oxide films

GB/T 19822-2005 Specifications for hard anodized oxide films on aluminum and aluminum alloys

GB/T 20503-2006 Anodizing for aluminum and aluminum alloys Determination of film specular reflectance and specular gloss in 20°, 45°, 60°, 85° angle directions

GB/T 20504-2006 Determination of image clarity of anodized anodized films on aluminum and aluminum alloys Bar marking method

GB/T 20505-2006 Determination of surface reflection properties of anodized anodized films on aluminum and aluminum alloys Integrating sphere method

GB/T 20506-2006 Aluminum and aluminum alloys Determination of surface reflection properties of anodized anodized films: Shading goniometer or goniometer method

GB/T 26296-2010 Defects in aluminum and aluminum alloy anodized films and organic polymer coatings

GB/T 36159-2018 Selection of surface anodized coatings and organic polymer coatings, properties and detection methods of aluminum and aluminum alloys for construction

HB 5055-1993 Sulfuric acid anodized coatings on aluminum and aluminum alloys Quality inspection

Quality inspection of chromic acid anodized coating on HB 5056-1977 aluminum and aluminum alloys (trial)

Quality of chromic acid anodized coating on HB 5373-1987 aluminum and aluminum alloys Inspection

ISO 2106-2011 Gravimetric method for determination of mass per unit area (surface density) of anodized anodized films on aluminum and aluminum alloys

ISO 2128-2010 Anodizing of aluminum and aluminum alloys Determination of the thickness of the anodized film Split-beam microscopy non-destructive measurement method

ISO 3211-2010 Deformation method for anodizing aluminum and aluminum alloys to evaluate the crack resistance of the anodized film

ISO 4746- 1977 Oxygen-free copper oxide film adhesion test

ISO 8994-2011 Anodized aluminum and aluminum alloy pitting corrosion method to evaluate aluminum and aluminum alloy anodized film grid method

ISO 11408 -1999 Specifications and test methods for black oxide films on chemical conversion coatings on steel

ISO FDIS 2106.2-2010 Gravimetric method for determination of mass (surface density) per unit area of ​​anodized anodized coatings on aluminum and aluminum alloys

p>

ISO FDIS 2106-2010 Gravimetric method for determination of mass (surface density) per unit area of ​​anodized anodized films on aluminum and aluminum alloys

ISO FDIS 8251-2010 Anodized anodes on aluminum and aluminum alloys Wear resistance measurement of oxide film

KS DISO 11408-2001 Specifications and test methods for black oxide film on steel

CB 1286-1996 Technical requirements and inspection methods for hard anodized coatings on aluminum alloy shells of torpedoes

CB 20086-2012 Technical requirements for hard anodized coatings on aluminum and aluminum alloy torpedo products

CB 20142-2014 Specification for titanium alloy insulating anodized coatings for ships and ships

DIN EN ISO 2085-2010 Continuity test method for aluminum and aluminum alloy anodized thin anodized films Copper sulfate method

DIN EN ISO 2128-2010 Determination of thickness of anodized anodized films on aluminum and aluminum alloys. Non-destructive determination method using split-beam microscopy

DIN EN ISO 2143-2010 Sealing of anodized films on anodized aluminum and aluminum alloys Assessment of post-adsorption capacity loss Dyeing spot test after acid treatment

DIN EN ISO 2931-2010 Anodic oxidation of aluminum and aluminum alloys Assessment of sealing quality of anodic oxide films measured by admittance method

DIN EN ISO 3210-2010 Aluminum and aluminum alloy anodized phosphoric acid/chromic acid etching to evaluate the sealing quality of the anodized film based on mass loss

DIN EN ISO 3211-2010 Aluminum and aluminum alloy anodes The oxidation deformation method is used to evaluate the crack resistance of anodized films

DIN EN ISO 6581-2010 Determination of the relative fastness of anodized and colored anodized films on aluminum and aluminum alloys to ultraviolet light and heat

DIN EN ISO 7599-2010 General specification for anodized aluminum anodic oxide films on aluminum and aluminum alloys

DIN EN ISO 10215-2010 Visual determination of image clarity of anodized anodic oxide films on aluminum and aluminum alloys Bar marking method

DIN EN 12373-21-1997 Aluminum and aluminum alloys. Anodizing treatment. Part 21: Protective anodized coating on aluminum substrates

BAIJIAN Materials Testing Laboratory What are the advantages?

1. A collectively owned testing institution with complete qualifications and scientific, fair and accurate test reports.

2. Multiple laboratory branches are located across the country, supporting door-to-door sampling/sending samples for testing.

3. The testing cycle is short, the testing cost is low, and the experimental plan is more complete.

4. For initial inspection of samples, no testing fees will be charged during the initial inspection.

5. The test report supports scanning the QR code to check the authenticity.

BAIJIAN testing process

1. Send samples. (Communicate with engineers, submit your own testing requirements and send samples to our research institute)

2. Initial inspection samples. (After receiving the sample, conduct a preliminary inspection of the sample and formulate a detailed experimental plan)

3. Quotation. (After the initial inspection, a quotation will be made based on the customer’s testing needs and the complexity of the experiment)

4. Both parties confirm, sign a confidentiality agreement, and start the experiment.

5. It takes 7-15 working days to complete the experiment.

6. Mail the test report and provide post-service.

The above is the relevant introduction to oxide film testing. If you have other testing needs, you can consult the laboratory engineer to help you solve it.