Efficient And Best Accurate

Detailed description

Gas corrosion test

Detection standard

  • Detection specification

Where can I do gas corrosion testing? BAIJIAN material testing agency can provide gas corrosion testing services, third-party materials laboratory, CMA qualification certification agency, complete instruments, strong scientific research team, mainly engaged in industrial diagnosis, material composition testing, quality testing , performance testing, identification of unknown substances, non-standard testing, methodological verification and other services. Test reports will be issued within 7-15 working days. Test reports support scanning QR codes to check authenticity. Multiple laboratory branches across the country support door-to-door sampling nationwide. /Send sample testing service.

Gas corrosion test items

Mixed gas corrosion test, chemical gas corrosion test, sulfur dioxide gas corrosion test, high temperature gas corrosion test, flowing gas corrosion test, hydrogen fluoride gas corrosion test, dioxide Nitrogen gas corrosion test, chlorine gas corrosion test, ozone test, hydrogen sulfide gas corrosion test, NACE acid gas corrosion test, etc.

Gas corrosion test scope

Auto parts gas corrosion, cable gas corrosion, electronic appliances gas corrosion, vehicles and parts gas corrosion, rail transit gas corrosion, aerospace ship gas corrosion, medical Instrument gas corrosion, etc.

Introduction to gas corrosion test

This test is used to determine the adaptability of the product to work and storage in the atmospheric environment, especially the contacts and connectors. The main factors affecting corrosion include temperature and humidity, corrosive components of the atmosphere, etc. The severity of the test depends on the type of corrosive gas and the duration of exposure. It can simulate various corrosive gases such as NO2, SO2, CO2, H2S, Cl2, etc. that exist in the atmosphere. It can conduct single or multiple mixed gas corrosion tests and accelerate materials or products under a certain temperature and relative humidity environment. Corrosion reproduces the extent of damage suffered by a material or product over a certain period of time. And compare the process quality of similar protective layers, the protective layers of parts, electronic components, metal materials, electricians, electronics and other products, as well as the corrosion ability of industrial products in mixed gases.

What are the uses of BAIJIAN test reports? What problems can it help you solve?

1. Sales report. (Sales need to provide third-party testing reports to make their products more unique, let the product data speak for themselves, and make customers more confident in the quality of their products.)

2. Industrial diagnostic report. (When encountering some thorny issues about ingredients, use third-party testing data to find the cause of the problem and solve the problem in a timely manner.)

3. Improve product quality. (Discover problems with your own products through comparison of third-party testing data, improve product problems, improve quality, and reduce production costs)

4. Use of scientific research paper data.

5. Products are used for import and export.

Gas corrosion test standard

GB/T 2423.51-2012 EnvironmentTest Part 2: Test test Ke: Flow mixed gas corrosion test

GB/T 32283-2015 Gas corrosion resistance test of refractory materials used in the upper part of the kiln

IEC 60068-2- 60-1995 Environmental testing Part 2-60: Test test Ke: Flow mixed gas corrosion test

IEC 60512-11-7-2003 Test and measurement of connectors for electronic equipment Part 11-7: Climate Test test 11g: Flow mixed gas corrosion test

ISO 10062-2006 Test of corrosion degree of low-concentration pollutant gas in artificial environment

JIS Z2291-2004 High-temperature gas corrosion test of metal materials


KS C0248-60-2001 Environmental Test (Electrical, Electronic) Mixed Gas Corrosion Test

NF C20-760-1996 Environmental Test Part 2: Test Section 60: Test Ke: Flow Mixed gas corrosion test

NF EN 60068-2-60-1996 Environmental testing Part 2: Test Section 60: Test Ke: Flow mixed gas corrosion test

NF EN 60512- 11-14-2006 Electromechanical components for electronic equipment. Basic test procedures and measurement methods. Part 11: Climatic test. Section 14: Test 11p: Single-flow gas corrosion test

GB/T 5170.11-2008 Inspection methods for environmental testing equipment for electrical and electronic products Corrosive gas testing equipment

GB2423.51-2000 Environmental testing for electrical and electronic products

BS EN 60512-11-7-2003 Electromechanical components for electronic equipment .Basic test procedures and measurements. Climatic tests. Test 11g: Corrosivity test of flowing mixed gases

BS EN 60512-11-14-2003 Electromechanical components for electronic equipment. Basic test procedures and measurements. Climatic tests. Corrosion test for flowing single gases

DIN EN 60512-11-7-2004 Tests and measurements of connectors for electronic equipment Part 11-7: Climatic test Test 11g: Corrosion test for flowing mixed gases

DIN EN 60512-11-14-2004 Testing and measurement of connectors for electronic equipment Part 11-14: Climatic test Test 11p: Flow single gas corrosion test

BAIJIAN Material Testing Laboratory What are the advantages?

1. A collectively owned testing institution with complete qualifications and scientific, fair and accurate test reports.

2. Multiple laboratory branches are located across the country, supporting door-to-door sampling/sending samples for testing.

3. The detection cycle is short and the detectionThe cost is low and the experimental plan is more complete.

4. For initial inspection of samples, no testing fees will be charged during the initial inspection.

5. The test report supports scanning the QR code to check the authenticity.

BAIJIAN testing process

1. Send samples. (Communicate with engineers, submit your own testing requirements and send samples to our research institute)

2. Initial inspection samples. (After receiving the sample, conduct a preliminary inspection of the sample and formulate a detailed experimental plan)

3. Quotation. (After the initial inspection, a quotation will be made based on the customer's testing needs and the complexity of the experiment)

4. Both parties confirm, sign a confidentiality agreement, and start the experiment.

5. It takes 7-15 working days to complete the experiment.

6. Mail the test report and provide post-service.

The above is the relevant introduction to gas corrosion testing. If you have other testing needs, you can consult the laboratory engineer to help you solve it.

Previous post:Fire resistance grade testing Next chapter:

TEL:400-101-7153       EMAIL:service@Baijiantest.com      ADD:No. 700, Yishan Road, Xuhui District, Shanghai

Copyright © 2021-2022 Shanghai Baijian Co., Ltd. All Rights Reserved.   www.zhijiantest.com   BAIJIAN sitemap

seo seo